FX9

Auto Added by WPeMatico

Guess The Lens! A little bit of fun and an interesting test.

Last week I was at O-Video in Bucharest preparing for a workshop the following day. They are a full service dealer. We had an FX9 for the workshop and they had some very nice lenses. So with their help I decided to do a very quick comparison of the lenses we had. I was actually very surprised by the results. At the end of the day I definitely had a favourite lens. But I’m not going to tell you which one yet.

The 5 lenses we tested were: Rokinon Xeen, Cooke Panchro 50mm, Leitz (lecia) Thalia, Zeiss Supreme Radiance and the Sony 28-135mm zoom that can be purchased as part of a kit with the FX9.

I included a strong backlight in the shot to see how the different lenses dealt with flare from off-axis lights. 2 of the lenses produced very pronounced flare, so for those lenses you will see two frame grabs. One with the flare and one with the back light flagged off.

I used S-Cinetone on the FX9 and set the aperture to f2.8 for all of the lenses except the Sony 28-135mm. For that lens I added 6dB of gain to normalise the exposure, you should be able to figure out which of the examples is the Sony zoom.

One of the lenses was an odd focal length compared to all the others. Some of you might be able to work out which one that is, but again I’m not going to tell you just yet.

Anyway, enjoy playing guess the lens. This isn’t intended to be an in depth test. But it’s interesting to compare lenses when you have access to them.  I’ll reveal which lens is which in a couple of weeks in the comments. You can click on each image to enlarge it.

Big thanks to everyone at O-Video Bucharest for making this happen.

Lens1-flare Guess The Lens! A little bit of fun and an interesting test.
Lens 1 with flare from backlight.
lens1-no-flare Guess The Lens! A little bit of fun and an interesting test.
Lens 1 with backlight flagged to reduce the flare.
lens2 Guess The Lens! A little bit of fun and an interesting test.
Lens 2
lens-3 Guess The Lens! A little bit of fun and an interesting test.
Lens 3
lens-4-no-flare Guess The Lens! A little bit of fun and an interesting test.
Lens 4
lens-5-flare Guess The Lens! A little bit of fun and an interesting test.
Lens 5 with flare from backlight
lens-5-No-flare Guess The Lens! A little bit of fun and an interesting test.
Lens 5 with backlight masked to kill the flare.

Guess The Lens! A little bit of fun and an interesting test. was first posted on December 16, 2019 at 5:55 pm.
©2018 “XDCAM-USER.COM“. Use of this feed is for personal non-commercial use only. If you are not reading this article in your feed reader, then the site is guilty of copyright infringement. Please contact me at contact@xdcam-user.com

Shooting S-Log3 on the PXW-FX9 – Do I need to expose bright?

Having shot quite a bit of S-Log3 content on the new Sony PXW-FX9 I thought I would comment on my exposure preferences. When shooting with an FS5, FS7 or F5, which all use the same earlier generation 4K sensor I find that to get the best results I need to expose between 1 and 2 stops brighter than the 41% for middle grey that Sony recommend. This is because I find my footage to be noisier than I would like if I don’t expose brighter. So when using CineEI on these cameras I use 800EI instead of the base 2000EI

However the FX9 uses a newer state of the art back illuminated sensor. This more sensitive sensor produces less noise so with the FX9 I no longer feel it is necessary to expose more brightly than the base exposure – at either of the base ISO’s. So if I am shooting using CineEI and 800 base, I use 800EI. When shooting at 4000 base, I use 4000 EI. 

This makes life so much easier. It also means that if you are shooting in a mode where LUT’s are not available (such as 120fps HD) then you can use the included viewfinder gamma assist function instead. Viewfinder gamma assist adds the same 709(800) look to the viewfinder as you would get from using the cameras built in 709(800) LUT.  You can use the VF gamma assist to help judge your exposure just as you would with a LUT.  Basically, if it looks right in the viewfinder, it almost certainly is right.

Testing various FX9’s against my Sekonic light meter the cameras CineEI ISO ratings seem to be spot on. So I would have no concerns if using a light meter to expose.  The camera also has a waveform scope and zebras to help guide your exposure.

VF Gamma assist is available in all modes on the FX9, including playback. Just be careful that you don’t have both a LUT on and gamma assist at the same time.


Shooting S-Log3 on the PXW-FX9 – Do I need to expose bright? was first posted on December 1, 2019 at 7:19 pm.
©2018 “XDCAM-USER.COM“. Use of this feed is for personal non-commercial use only. If you are not reading this article in your feed reader, then the site is guilty of copyright infringement. Please contact me at contact@xdcam-user.com